Type |
Two, pilot and observer |
Engine |
1 Maybach Mb.IVa |
Dimensions |
Length 8,20 m , height 3,20 m , span 12,65 m , wing area 34,8 m2 , |
Weights |
Empty 1050 kg, loaded 1485 kg , max. take off weight |
Performance |
Max.. speed 175 km/h, cruising speed , range 585 km, endurance , service ceiling 7300 m , climb |
Type |
Werk.Nr |
Registration |
History |
|
7949 |
D-398, [LFRA] D-54 |
Luftbildvermessungstrupp der Landesaufnahme/Adlershof |
|
3250 |
D-399, [LFRA] D-55 |
Luftbildvermessungstrupp der Landesaufnahme/Adlershof |
|
9912 |
D-401, [LFRA] D-53 |
Luftbildvermessungstrupp der Landesaufnahme/Adlershof |
|
9914 |
D-402, [LFRA] D-56 |
Luftbildvermessungstrupp der Landesaufnahme/Adlershof |
The Rumpler C.VII was a military reconnaissance aircraft built in Germany during World War I. It was developed from the C.IV and optimised for high-altitude missions that would allow it to operate at heights that would render it immune to interception by enemy fighters. Work on the C.VII took place after a similar attempt to develop the C.III into a high-altitude machine as the C.V failed.
The most significant difference between the C.IV and C.VII was the choice of the Maybach Mb IVa engine to replace the Mercedes D.IV. Although the Maybach engine was around 8% less powerful than the Mercedes (when measured at the sea level), it could continue to provide most of its power output while at altitude, where power from the Mercedes engine decreased more rapidly as height increased Other changes included wings of slightly greater area and an airscrew of larger diameter.[4] The crew were provided with oxygen generators and electrically-heated flight suits.
Rumpler produced the C.VII in two versions: a standard radio-equipped reconnaissance machine, and a photographic version named the Rubild (or Rubilt) a contraction of Rumpler Bildaufklärer (photo reconnaissance)
The two versions of the Rumpler C.VII were in service simultaneously. The standard C.VII was used for armed long-distance reconnaissance. The armament was one fixed, synchronized LMG 08/15 Spandau machine gun firing forward, and one manually operated 7.92 mm Parabellum MG14 machine gun at the observer/gunner's rear position (the observer also operated a radio). The Rubild was a "stripped-down" version that dispensed with the forward gun and eliminated all other extraneous equipment in order to carry specialized cameras.
The Rubild was capable of operating as high as 7,300 m , and could maintain 160 km/h at 6,100 m The high-altitude version proved practically invulnerable to interception above 5,500 m . Allied combat reports most often featured the high-flying Rubild. The type was particularly difficult to intercept, as the Allied fighters were seldom able even to climb to such altitude. According to noted ace James McCudden, "It was an exception to the rule to see an [ S.E.5 ] above 17,000 feet. One of the few Allied fighters able to reach such altitudes, and hence capable of intercepting the Rubild, was the Sopwith Dolphin.
At the end of the war, at least one Rumpler C.VII was captured and sent to the United States.
A few machines were intended for passenger carrying, but was not useful because no need was for a highflying plane